You are here:Home > Parts & Acc.
Choose:
Shop by Category New! Metal Department Fenders
Sissy Bars Shop by Brand
Sort By:
Page of 3
Gooden-Tite Handle Bar Bushings Progressive Fork Spring Kit Progressive Fork Lowering Kit "Drop In"
Gooden-Tite Handle Bar Bushings reduces the vibrations in your handlebars and fits a wide variety of Harley Davidson Models. Progressive Shocks 422 series shock Progressive Shocks 422 series shock
2018+ Fat Bob Handlebars Harley Davidson  FLST/FXST/all Lowering Kit Harley Davidson FXSB Lowering Kit
2018+ Fat Bob Handlebars
Price:$599.95
Updated Price:$200.00
You save $399.95!
We build all of our BSC Handlebars here in house. We will include all the hardware necessary to bolt in. It comes in satin or gloss black to match your stock look.
You are able to bolt these on to your stock risers but you will need to alter factory wiring, clutch cable and brake line.

change below.....

Non-ABS models will need brake line extensions for 3" risers. Non-ABS models will be able to use 2" risers without having to use any additional extensions.

Riser extensions are made from 6061 billet aluminum.
*When installing be sure to pull slack for turn signal wires through as much as possible without damaging harness before reconnecting turn signal wires. The wiring may be on the tighter side. If you choose to add wire extensions then the tank will have to come off.

*Please take this to a certified mechanic to install if you are not comfortable installing these riser extensions.

As of 6 Mar 2020 2" and 3" are in stock!

Order now. First come first serve

Check out our other products for the Fat Bob
2018+ Fat Bob Seat
2018+ Fat Bob License Plate Relocation Kit
KIT IS NOT FOR SPRINGER OR INVERTED FRONT END


The innovative Genisis Series spring set up contains a specially designed Multirate outer spring and a one of a kind Genisis inner spring that are assembled together to make the Genisis Series. The Genisis Series works great wheather you ride alone or with a passanger, by putting the Genisis spring inside the outer fork springs it allows the springs to work together instead of against each other. The inner fork sprin is there when you need it for hard braking and extreme riding conditions of any kind, making them almost impossible to bottom. Each standard Genisis Series kit comes with two Genisis series fork springs (preassembled), 4 Genisis washers, aluminum spacer and instructions.

We use the dual spring combination of the Genisis Series springs and our polished lowering springs to give you what we consider as one of the best front end lowering kits available today. By using the Genisis Series fork springs we are able to give you a comfortable ride without worrying about bottoming out because the Genisis inner spring is there to give you that extra power when you need it.
The innovative Genisis Series spring set up contains a specially designed Multirate outer spring and a one of a kind Genisis inner spring that are assembled together to make the Genisis Series. The Genisis Series works great wheather you ride alone or with a passanger, by putting the Genisis spring inside the outer fork springs it allows the springs to work together instead of against each other. The inner fork sprin is there when you need it for hard braking and extreme riding conditions of any kind, making them almost impossible to bottom. Each standard Genisis Series kit comes with two Genisis series fork springs (preassembled), 4 Genisis washers, aluminum spacer and instructions.

We use the dual spring combination of the Genisis Series springs and our polished lowering springs to give you what we consider as one of the best front end lowering kits available today. By using the Genisis Series fork springs we are able to give you a comfortable ride without worrying about bottoming out because the Genisis inner spring is there to give you that extra power when you need it.
2018+ Fat Bob 2-3" Riser Extensions Replacement Foot Brake Arm and Accessories Replacement Shift Arm and Accessories


We have our BSC 3" riser extensions we make in-house. We will include all the hardware necessary to bolt in. It comes in satin black to match your stock look.
You are able to bolt these in without having to alter factory wiring, clutch, or brake line for ABS models. Non-ABS models will need brake line extensions for 3" risers. Non-ABS models will be able to use 2" risers without having to use any additional extensions.

Riser extensions are made from 6061 billet aluminum.
*When installing be sure to pull the slack for turn signal wires through as much as possible without damaging the harness before reconnecting the turn signal wires. The wiring may be on the tighter side. If you choose to add wire extensions then the tank will have to come off.

*Please take this to a certified mechanic to install if you are not comfortable installing these riser extensions.

Check out our other products for the Fat Bob
2018+ Fat Bob Seat
2018+ Fat Bob License Plate Relocation Kit
Available in Chrome or Black Powder Coat Available in Chrome or Black Powder Coat
Matching Replica Rotors for Rocker and Rocker C LED Turn Signal Kit for BSC Hardtail Rear Fender Risers installed on the Harley Davidson Breakout
Rotors for the Rocker and Rocker C U.S. applications will require the "Illuminator" option. This will keep you legal in the states and allow your turn signals to work as running lights, brake lights and turn signals.

This kit includes our hollow flat mounting hardware. This way the screw heads will not interfere with the rear tire.

Lazer Star Billet Lights are a perfect on-road and off-road lighting solution, an essential component in your lighting repertoire. Lazer Star Billet Lights are carefully machined from 6061 billet aluminum, feature borosilicate clear glass lenses for optimum durability, and proudly made in the USA. This product is also sold in pairs and offers a limited lifetime warranty. These lights feature a chrome or black anodized finish and 5/16-24 x 1 stainless steel hollow bolts & 5/16 spacers, best used when mounting to a flat location with rear access for wire exit and light tightening. Product measures 1-3/16" Diameter x 1-7/8" Long. Most vehicle applications require a load equalizer when replacing OEM turn signals.
BSC's Aluminum 2 or 3-inch Breakout Riser Extensions
Increase your handlebars by 2 or 3 inches without having to buy a whole handlebar setup
Matches the stock look of your Breakout
Comes with hardware pictured

With this kit, you will need to relocate your stock turn signal location.

Rocker and Rocker C Front Fenders Front Bagger FL Fender Jardine BSC Muscle Sissy Bar and Luggage Rack Kit
These fenders are all hand cut and trimmed here at Bitchin Seats to directly bolt onto your Harley Davidson Softail Rocker and Rocker C Models. Choose to get your fender painted though our highly acclaimed painter to match your bikes paint job. This fender features a wrap around style that will hug your wheel and create a very sleek look to your front wheel.

23" and 26" fenders will require you to run out BSC Wide Glide font end kit.
Replacement front fender for Harley Davidson Bagger / FL Models. Jardine BSC Muscle Sissy Bar and Luggage Rack Kit
Harley Davidson LED Turn Signal 2018 Fat Bob License Plate Relocation Kit Pull Back Handlebars
LED Turn Signal Kit for Stock Rocker 2018 Fat Bob License Plate Relocation Kit Designed exclusively by Bitchin Seats
New Aftermarket Rocker and Rocker C Pull Back Handle Bars.

These bars are the more cost effective route to change the handle bars that is available for the Rocker models because you do not have to change out the wires, brake lines, or clutch cables. This will also improve the angle of your wrists for more comfortable ride.

Works with the shortest Rocker owners (from 5 feet) up to the tallest Rocker owners (roughly 6 foot 8 inches) because they are adjustable to your preference.

These bars do NOT need to new risers or cables.
Designed to use stock your stock hand controls, hand brake, brake line, and both throttle cables!

These chrome handle bars work with the stock risers and cables on the rocker. BSC created these bars with a 3 inch pull back position and a 3 inch lower grip height. From the center of the end of the grips measures 32 inches. The handlebars are made to be rotatable. You can move them down to be in closer or forward to be out. They are also designed to be three inches back and three inches down from stock height. Just like our seat. This bar system was designed to work with our accordion seat, the seat moves you down and back so some riders may want to bring the bars down and back as well. This gives the rider a more comfortable handle bar position and looks extremely chopper. And if the budget is there; relocate the signals, like we did, and get rid of those stock mirrors.

120 wall DOM steel with a chrome finish Exclusively through Bitchin Seat Co.

Fits: All 2008 2009 2010 2011 Rocker and Rocker C Harley Davidson HD Models
Sissy Bar for the Harley Davidson Rocker Rocker C Front Breakout FXSB Fender Breakout Front Fenders | Direct Bolt On Breakout Quick Release “Move Her Back” Sissy Bar Mount Kit
Breakout Quick Release “Move Her Back” Sissy Bar Mount Kit
Price:$600.00
Updated Price:$500.00
You save $100.00!
Sissy Bar for the Harley Davidson Rocker Rocker C These fenders are all hand cut and trimmed here at Bitchin Seats to directly bolt onto your Harley Davidson Softail Breakout Models. Choose to get your fender painted though our highly acclaimed painter to match your bikes paint job. This fender features a wrap around style that will hug your wheel and create a very sleek look to your front wheel.

This fender will come with chrome hardware and spacer kit included.
Breakout Quick Release “Move Her Back” Sissy Bar Mount Kit.

Since our seat and pillion pad system allows the driver and passenger to move back in the saddle this creates a problem when using the OEM sissy bars available from Harley. So we developed replacement sissy bar mounts that work with your stock sissy bar and quick release docking hardware on the fender struts. They are calibrated 2.5” back from stock giving more real estate for the driver and passenger if needed.
- Designed for use on Harley-Davidson Softail Breakout. Equipped with OEM quick release sissy bar system.
- Moves passenger back 2.5” from stock bar position and is intended to work with Bitchin Seat Company’s driver and passenger seat systems.
- This kit is just the Right and Left side mount system and you will need to use your existing OEM H-D sissy bar, back pad and quick release hardware off of your original equipment.
- If you prefer us to customize your backrest to match the seat leather, reconfigure backrest shape, or even make changes to the sissy bar dimensions and styling, You can contact us for consultation and pricing.
- BSC also make total custom sissy bars for this application in many configurations.
Twelve Point Swingarm Pivot Bolt And Engine Mount Hardware Kit Passenger Pillion Pad  for Rocker and Rocker C FXCW FXCWC Harley Davidson License Plate Relocation Kit
Twelve Point Swingarm Pivot Bolt and Engine Mount Hardware Kit for a clean custom look.

304 Stainless Threaded shafts
ARP 12 point Chrome flange nuts
Chrome washers
1018 Steel Chrome spacers

We chose to use 304 stainless steel shafts for tighter tolerances, corrosion resistance and longevity. OEM engine bolts tend to build up corrosion over time. Making it tougher to remove during tear down.

This kit is currently setup to work with 08-11 Rockers(FXCW, FXCWC) and 13-17 Breakout (FXSB, FXSBSE)

For custom application shoot us an email or give us a call.
Passanger Pillion Pad  for Rocker and Rocker C FXCW FXCWC License Plate Relocation Kit
422 series shocks aftermarket progressive for Harley Davidson Front End Kit for Harley Davidson Dyna 23 x 3.75 Wheel Matching Replica Pulley for Rocker and Rocker C
Dyna Triple Trees
Price:$592.00
Progressive Shocks 422 series shock Dyna Triple Trees Pulley for all Rocker and Rocker C models
Front End Kit for Harley Davidson Rocker and Rocker C 23 x 3.75 Wheel Front End Kit for Harley Davidson Rocker and Rocker C 23 x 3.75 Wheel Semi Production Seat for the Harley Davidson Rocker and Rocker FXCW FXCWC
Rocker Triple Trees
Price:$682.00
Rocker Triple Trees Breakout Triple Trees Save some money, be comfortable, and close the gap