|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits RSD 240mm Vintage Fender and strut kit used with PM Phatail Conversion kits. Tombstone Style Sissy bar in 5/8” thick solid round Stainless steel, steel chromed or steel powder coated in black or customer colors available. Backrest face and back cover in glassed Buffalo with a smooth leather band. Can be made in different configurations. This is a custom sissy bar priced at $1000. And the pad in smooth leather is $500. Exotic leather upgrades are available. The trick design of this sissy bar is that when taking off the back pad you don’t have mounting tabs attached to the bar. We made a sweet two piece clam shell style backrest that locks to the sissy bar without the tabs. This allows you to take it off when it isn’t needed, changing the look of the bike. We call this type of sissy bar kit a Convertible.
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Available for PM Phatail 240 Kit , RSD Vintage Kit, and Tracker Kit
|
Low Profile
|
Low Profile Breakout Seat For Thunderbike Rear Fender
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low Profile
|
Low Profile
|
These fenders are all hand cut and trimmed here at Bitchin Seats to directly bolt onto your Harley Davidson Softail Breakout Models. Choose to get your fender painted though our highly acclaimed painter to match your bikes paint job. This fender features a wrap around style that will hug your wheel and create a very sleek look to your front wheel.
This fender will come with chrome hardware and spacer kit included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These fenders are all hand cut and trimmed here at Bitchin Seats to directly bolt onto your Harley Davidson Softail Rocker and Rocker C Models. Choose to get your fender painted though our highly acclaimed painter to match your bikes paint job. This fender features a wrap around style that will hug your wheel and create a very sleek look to your front wheel.
23" and 26" fenders will require you to run out BSC Wide Glide font end kit.
|
This Simply Smooth one piece console is adaptable to your 2000 and up Harley-Davidson Softails equipped with the speedometer clusters mounted to stock HD and some custom gas tanks. BSC frequently uses this console to integrate with PM Phatail, RSD Tracker, Vintage and our own custom BSC conversion kits. If you plan to change your bike up a bit and it’s time for BSC to make you a new custom seat, we highly suggest the ultra-clean RWD one piece consoles for you bike.
*RWD Console is not for Deuce or Rocker models
Specifications:
1.RWD one piece instrument console
2. Made from Die cast aluminum
3. The console can be panted, Powder coated, polished or chromed.
4. Fits 2000 up stock HD Softail gas tanks with speedo mounted consoles. This console can be used on RWD and BSC custom stretched gas tanks. (Does not fit stock HD Deuce or Rocker Gas tanks)
5. RWD console is available untrimmed but is required to be trimmed to fit most applications. The trim and fitting modifications need to be done be here at BSC if we are making the seat pan for your custom seat. If you require a Bitchin Fit Seat Pan Kit, we can send you the RWD console with it for your build.
6. RWD one piece console cost $ 200.00 and it is a $50.00 charge for trim to fit your application.
Why Now before I get my new BSC Seat?
BSC is famous for our supper tight fitting custom motorcycle seats and we require all modifications (if needed) to be done to the bike or added components before we can make your new custom seat.
How do we do this without your bike?
BSC has developed High Tech frame fixtures for various Softail models. We use these Fixtures for building Custom Seats, Sissy bars, gas tanks, fenders, fender struts and for fitting custom tank consoles. Once the conversion is done with whatever combination that you go with, it then is time for BSC to make the custom seat pan on our fixture.
|
The BSC Rocker and Breakout Hardtail rear fender kits bolt directly to your swing arm. They are designed to give that tight fender to the tire look that has been recognized in the custom Big V-Twin industry on Hardtail and Softail Choppers. Most will recognize this Hardtail look from custom builders like Hot Match Custom Cycles and manufactures like Big Bear Choppers for building custom Softail bikes with the rear fender bolted or even welded to the swing arms. In 2008 the Harley-Davidson Rocker hit the market with a 240mm rear tire and it being covered with the old fender attached to the swing arm trick.
Great idea!!
But what happened to the rest of the bike??
It seems that the bike was lacking our famous BSC Accordion Seat that was already being used worldwide for the custom industry. That’s where we started to clean this Rocker up and to create a large variety of parts and accessories for the bike.
BSC Rocker and Breakout 260mm Hardtail style rear fender specifications
1. This rear fender fits 2008 to 2011 Rockers and 2013 up Breakouts. It is simply installed with 4 bolts to the stock swing arm fender mounting holes. The fender also mounts Breakout swing arm the same way.
2. This fender will accommodate all 240mm, 250mm wide tires, and (the 260mm tire ONLY from Metzler)
3. These fenders are hand made from cold rolled stamped steel and then structured internally with Tig welded ¼”thick steel radius’s and then caged with a skeletal like structure for strength.
4. Stainless steel tubing is rolled and then Tig welded in to the inner fender structure to protects the taillight wires from being damaged.
5. This fender design is made half as high off the tire than the stock Rocker fender and is twice as strong. There is no need for our Rocker fender support kit with this heavy duty fender, as it is needed for the stock Rocker rear fender when running a pillion pad for a passenger.
Accessories for your fender kit
6. Custom Fender support kits are available for the BSC Hardtail fenders if desired. $500.00
7. Custom Sissy bars are available for attaching to our fender support kits. $500.00 on up
8. BSC side hack license plate and Axle block cover kit. $500.00
9. Extra small Lazer Star LED tail lights. (they come in black anodize and chrome ) $300.00
10. BSC Accordion solo seat and pillion pads for your custom hardtail fender.
11. Custom paint division- Our painters can match most of the stock HD colors. Give us a call to see if we have your color match for your bike, if we don’t you can send the original fender for matching. Rear fender paint and body average cost around $1000.00 but we will need to see your paint scheme to quote it before price confirmation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Breakout Quick Release “Move Her Back” Sissy Bar Mount Kit.
Since our seat and pillion pad system allows the driver and passenger to move back in the saddle this creates a problem when using the OEM sissy bars available from Harley. So we developed replacement sissy bar mounts that work with your stock sissy bar and quick release docking hardware on the fender struts. They are calibrated 2.5” back from stock giving more real estate for the driver and passenger if needed. - Designed for use on Harley-Davidson Softail Breakout. Equipped with OEM quick release sissy bar system. - Moves passenger back 2.5” from stock bar position and is intended to work with Bitchin Seat Company’s driver and passenger seat systems. - This kit is just the Right and Left side mount system and you will need to use your existing OEM H-D sissy bar, back pad and quick release hardware off of your original equipment. - If you prefer us to customize your backrest to match the seat leather, reconfigure backrest shape, or even make changes to the sissy bar dimensions and styling, You can contact us for consultation and pricing. - BSC also make total custom sissy bars for this application in many configurations.
|
BSC Rocker Conversion
|
Breakout Triple Trees
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018 Fat Bob Custom Seat
|
2018 Sport Glide Custom Seat
|
The motorcycle seats for the Harley Davidson 2018+ Softail Breakout. Our BSC seat will transform the look of your bike and dramatically improve your ride.
|
|
|
|
|
|
|
|
|
|
|
|
IN STOCK READY TO SHIP!
This seat is a 2008 to 2017 Softail Wife Beater Seat excluding those with 240 mm rear tires. Seat. For height 5'10" or taller.
This is our standard MC black leather-covered seat was custom hand-shaped with nitro gel. The installation is very simple and your bike will not need any modifications.
The seat includes:
-Custom hand shaping foam and density
-Nitrated air gel (does not hold hot or cold, breathes well with weather)
-The seat has a density top pad with Custom painted Stingray inlays.
-Breast cancer support ribbon design
Is it comfortable? Unbelievably! Bitchin Seats is well known for making clients 100% comfortable on the bike with half the materials. We do this with the knowledge of knowing how motorcycles work and not making a “one size fits all” seat. This seat especially will create a whole new ride and appreciation for your Rocker.
|
|
|
