|
Replacement Foot Brake Arm and Accessories
|
|
Progressive Shocks 422 series
|
|
Pull Back Handlebars
|
|
Price: $239.95
|
|
|
|
Price: $499.95
|
|
|
|
Price: $499.95
|
|
|
|
|
|
|
Available in Chrome or Black Powder Coat
|
Progressive Shocks 422 series shock
|
Designed exclusively by Bitchin Seats - New Aftermarket Rocker pull back handle bars.
These bars do NOT need to new risers or cables. Designed to use stock your stock hand controls, hand brake, brake line, and both throttle cables!
These chrome handle bars work with the stock risers and cables on the rocker.
BSC created these bars with a 3 inch pull back position and a 3 inch lower grip height.
From the center of the end of the grips measures 32 inches.
The handlebars are made to be rotatable. You can move them down to be in closer or forward to be out.
They are also designed to be three inches back and three inches down from stock height. Just like our seat.
This bar system was designed to work with our accordion seat, the seat moves you down and back so some riders may want to bring the bars down and back as well. This gives the rider a more comfortable handle bar position and looks extremely chopper. And if the budget is there relocate the signals, like we did, and get rid of those stock mirrors.
Bars are made from 120 wall DOM steel with a chrome finish Exclusively through Bitchin Seat Co.
Fits: All 2008 2009 2010 2011 Rocker and Rocker C Harley Davidson HD Models
|
|
|
|
Tour Pack Bracket
|
|
Semi Production Seat for the Harley Davidson Rocker and Rocker C fxcw fxcwc
|
|
Street Glide Harley Davidson Custom Seat FLHX
|
|
Price: $500.00
|
|
|
|
Price: $699.95
|
|
|
|
Price: $775.00
|
|
|
|
|
|
|
Tour Pack Bracket
|
Save some money, be comfortable, and close the gap
|
Custom made seat handmade to you specifically
This seat can be designed around several different aspects for you specifically. Here are a few examples of what we can work with. If you are too tall and need to sit back down and further into the bike, or are having trouble being flat footed and do not feel safe on the bike. This is just a few small ideas of what we can work with. Each seat’s shape and ascetics are determined by your height weight and inseam. We will then go ahead a design the seat to what you need out of it. This seat no matter how low profile, will be extremely comfortable because of the inner design of the seat.
Each seat includes:
- Handmade fiberglass seat pan
-Custom hand shaping foam and density that is made to your specifications (height, weight, ECT)
-Nitrated air gel (does not hold hot or cold, breathes well with weather)
-All Italian smooth leather cover
-Velour lining
All upgrades available to purchase online are our base upgrades.
If you would like upgrades like sting ray, shark, alligator, ostrich, and more, please call because these prices vary on the market of this exotic.
We do use all grade one hides and upgrades and are handpicked to find the best and highest quality skins available, guaranteed.
Seat on average takes 8 hours to complete a solo and 14-16 hours for a two up
*photos above may show upgrades that are an additional cost
|
|
|
|
2007-2011 VRSC Custom Seat
|
|
Custom Seat for the Harley Davidson Rocker and Rocker C FXCW FXCWC
|
|
18" Rear Rocker and Rocker C Replica Billet Wheel
|
|
Price: $799.99
|
|
|
|
Price: $1,000.00
|
|
|
|
Price: $1,595.00
|
|
|
|
|
|
Bitchin Seats offers a one piece two up seat for the Harley Davidson V-Rod that will set you lower and further back into the bike. This will also lower your center of gravity and allow you to have a better handling of the bike. We use the highest quality products and set the highest quality of standards.
This seat includes:
- Custom fiberglass base seat pan to fit tight to the clean lines of the bike
- Several layers of custom density foam to fit your specific needs
- Hand shaped to your exact height weight and inseam
- Nitro Air gel – temperature neutral gel
- Billet aluminum hardware
- All black Italian Leather
- Velour lining
- Electronic Module Cover
This seat is all handmade, in house. This seat takes on average 12 hours to complete and is completely custom. We focus on making seat for those who want more than just an average seat.
Maybe you cannot be flat footed, or you are taller and feel that you sit up to high. To make you as comfortable as possible we factor all the custom modifications into the price of the seat. We will work with you on the phone or via email to address all your concerns. If you have medical issues and need that to be put into account, you bet Bitchin Seat Co will be there to assist you in making this seat fit all your needs.
We create seats for those who want to enjoy their bike to the fullest extent.
Key Reasons to make the change to a “Bitchin” VRSC seat:
- Lowers center of gravity
- Form fitting to the gas tank, frame, and fender.
- Better handling of the bike
- Sleek design to complement the look of the bike
- Tail bone relief - simply done by relocating electronic components to accommodate for tail bone relief and correct riding position.
- Correct cupped seat shape holds you in position to give you more control of motorcycle and prevent you from sliding back on fast starts, racing, or wheeling.
Click to read our Article in Hot Bike Magazine
|
Custom Seat for the Harley Davidson Rocker and Rocker C FXCW FXCWC
|
The rear wheel comes in polished, chrome, or powder coat.
It is an 18x8 ½ wheel that will allow you to put a 240 mm or a 250 mm tire on your Rocker. This great looking wheel has a smooth radius lip on the outer rim and rounded hubs but with the original 5 star MAG pattern. The wheel is complimented with a billet pulley (polished or chrome) which is properly clocked and aligns with the spokes.
The wheel also has a matching brake rotor made from 410 Stainless steel polished to a mirror finished
|
|
|
